How To Get Creases Out Of Shoes

How To Get Creases Out Of Shoes Recommended For You 2021

How To Get Creases Out Of Shoes? Your shoes are your sneakers or your dress shoes. Having creases and wrinkles can ruin your style. It’s easy to remove those annoying wrinkles from leather and suede.

You can bring back your shoes to their original state with a little patience, heat, and the right products. To clean and remove wrinkles from canvas and fabric shoes, you can give them thorough washing and drying.

Why Does Leather Shoe Creasing Occur?

Walking, your feet bend with your ball of the foot, acting as the pivot point. Creasing occurs when your shoes bend with your feet. Your shoes should bend. A shoe that does not bend will be too stiff to be comfortable to wear. Shoes that bend can cause creasing because the materials become compressed.

Over time, your shoes’ soles may develop a curvier profile than they did when you first bought them. They curve as they wear in and are repeatedly flexed while walking.

Shoes that are too large or poorly fitting are more likely to crease. Shoes that are too big or too small can cause extra creasing and foot discomfort.

Material and construction have a significant impact on creasing. Shoes made of better materials will resist creasing and stay in shape for a longer time.

Read also:

Why Does Leather Shoe Creasing Occur?

How To Get Creases Out Of Shoes?

1. With An Iron & Cotton Cloth

It would help if you first packed your shoes with newspaper. To help your shoes retain their shape, you can use a few pieces of stiff cardboard. The shoe should be packed as tightly as possible to prevent creases.

The next step is to dampen a small towel/washcloth with water. Next, lay the towel over the shoe’s creased area. Fold the towel in half and double it up. Suede shoes require you to squeeze as much water out as possible. The towel helps protect the shoe from direct heat.

Turn on your iron to 60-80 degrees Fahrenheit. After ironing the towel (on the shoes), take a few seconds to dry the towel. To check the progress of the iron and ensure there is no damage, lift the towel between passes.

Combining moisture and heat will soften the leather and begin to remove creases. Avoid direct heat contact as excessive heat can cause leather damage. Continue repeating until the creases and wrinkles disappear.

To help the leather cool down, you can leave the newspaper/cardboard in the shoe. To provide additional rigidity, a shoe tree can be inserted during cooling.

You can read also: How To Clean White Mesh Shoe

With An Iron & Cotton Cloth

2. With A Heat Gun Or Blow Dryer

To remove creases, you can use a heat gun or blow dryer. However, this method can be riskier as direct heat can cause permanent damage. This requires an attentive eye and steady hands.

Incorporate cedar shoe trees in the shoes. These are essential to fill in the shoes and mold the leather towards a form that is similar to afoot. The heat gun or blow dryer should be set to low and held 8-10 inches from the shoe. To warm the leather, gently make several passes back and forth. The heat gun can be turned off, and the leather should be massaged against the shoe tree.

If leather feels cold to the touch, heat the heat gun/blow dry again. This process should be repeated until wrinkles and creases are reduced. As the shoe cools, keep the shoe trees in their place.

The leather can be dried out by direct heat, so make sure to apply conditioner or polish after applying heat. You should apply polish or conditioner to the whole shoe. Otherwise, you might end up with an uneven color/finish.

With A Heat Gun Or Blow Dryer

3. With Conditioner or Oil

You can also use leather conditioners or oils to fix creases without heating the shoe. Apply the oil or leather conditioner to a small area on the shoe. To maintain a consistent color and finish, polish/condition all of the shoes. Continue to apply the oil with your hands.

To maintain the shoe’s shape, you can use a shoe tree. However, be careful not to put oil or conditioner on it. Shoe trees can be used to maintain the shoe’s shape after conditioning.

4. Shoe Trees

Shoe trees can be used to remove creases and are also useful for normal storage. Shoe trees provide rigidity, which keeps the leather from becoming creased when not in use. Cedar shoe trees also help to remove moisture from your shoes and keep them smelling fresh.


Creasing is inevitable. But the good news? You now know how to remove creases from sneakers. It’s easier than you might think.

You can save your shoes with or without an iron. This will allow you to get the best out of your shoes.

You could read the rest of our blog if you liked this post.

Leave a Comment

Your email address will not be published. Required fields are marked *